Rdxfbgrtj

White lead

Names
Other names Basic lead carbonate
Identifiers
CAS Number	1319-46-6 Y
ECHA InfoCard	100.013.901
Properties
Chemical formula	2PbCO3·Pb(OH)2
Molar mass	775.633 g/mol
Appearance	White powder
Hazards
Main hazards	Lead poisoning
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Y verify (what is YN ?)
Infobox references

Color pigments used on the warship Vasa, with white lead second from left, bottom shelf.

White lead is the basic lead carbonate, 2PbCO₃·Pb(OH)₂.^[1] It is a complex salt, containing both carbonate and hydroxide ions. White lead occurs naturally as a mineral, in which context it is known as hydrocerussite,^[1] a hydrate of cerussite.^[2] It was formerly used as an ingredient for lead paint and a cosmetic called Venetian Ceruse, because of its opacity and the satiny smooth mixture it made with dryable oils. However, it tended to cause lead poisoning, and its use has been banned in most countries.^[3]

White lead compounds known as lead soap were also used as additive for lubricants for bearings and in machine shops.^[4]

History

What is commonly known today as the "Dutch method" for the preparation of white lead was described as early as Theophrastus of Eresos^[5] (ca. 300 BC), in his brief work on rocks or minerals, On Stones or History of Stones. His directions for the process were repeated throughout history by many authors of chemical and alchemical literature. The uses of cerussa were described as an external medication and pigment.^[6]

Clifford Dyer Holley quotes from Theophrastus' History of Stones^[7] as follows, in his book The Lead and Zinc Pigments.

Lead is placed in earthen vessels over sharp vinegar, and after it has acquired some thickness of a sort of rust, which it commonly does in about ten days, they open the vessels and scrape it off, as it were, in a sort of foulness; they then place the lead over vinegar again, repeating over and over again the same method of scraping it till it has wholly dissolved. What has been scraped off they then beat to powder and boil for a long time, and what at last subsides to the bottom of the vessel is ceruse.^[8]

Later descriptions of the Dutch process involved casting metallic lead as thin buckles and corroded with acetic acid in the presence of carbon dioxide. This was done by placing them over pots with a little vinegar (which contains acetic acid). These were stacked up and covered with a mixture of decaying dung and spent tanner's bark, which supplied the CO2, and left for six to fourteen weeks, by which time the blue-grey lead had corroded to white lead. The pots were then taken to a separating table where scraping and pounding removed the white lead from the buckles. The powder was then dried and packed for shipment or shipped as a paste.^[9] One benefit of the process was that it was not necessary to dry the paste of white lead, removing its water. All that needed was to mill the paste with linseed oil, and the white lead would take up the oil and reject the residual water, to give white lead in oil.^{[citation needed]}

Paints

White lead has been the principal white pigment of classical European oil painting.^[10] There have been claims that it is partly responsible for darkening of old paintings over time, reacting with trace amounts of hydrogen sulfide in the air to produce black lead sulfide. Other authorities dispute this; the most traditional view is that impermanent pigments and dirty varnish (which is often cleanable) are more likely responsible for darkening.^{[citation needed]}

Paintings and the role of varnish, which might protect the white lead yet itself darken, aside—according to Michelle Facini, a paper conservator at the National Gallery of Art, lead carbonate to lead sulfide is indeed what happens to some lead chalks/paints in drawings and watercolors and other works done on paper and unvarnished. Varnish is meant to be removable from an oil painting, to strip off when it dirties or cracks; but on paper it soaks through and becomes inseparable from the paper fibers, ruinous as it ages. This is why works on paper are never, or should never, be varnished.

In any event, white lead has been mostly supplanted in artistic use by titanium white, which has much higher tinting strength than white lead.^[11] Critics argue that many of these substitutes are much less permanent.^[12] White lead is less used by today's painters, not because of its toxicity directly; but simply because its toxicity in other contexts has led to trade restrictions that make white lead difficult for artists to obtain in sufficient quantities. Winsor & Newton, the English paint company, was restricted in 2014 from selling its flake white in tubes and now must sell exclusively in 150 mL tins.^[13]

In the eighteenth century, white lead paints were routinely used to repaint the hulls and floors of Royal Navy vessels, to waterproof the timbers and limit infestation by shipworm.^[14]

Other synonyms (as an art pigment)

Flake white, silver white, slate white, Berlin white, Cremnitz / Kremnitz white, Crems / Krems white, Nottingham white, Vienna white^[10]

See also

• List of inorganic pigments


• Venetian ceruse


• White Lead (Painting) Convention, 1921

References

Further reading

• Gettens, R.J., Kühn, H. and Chase, W.T. Lead White, in Roy, A., (Ed), Artists' Pigments, Vol 2, Oxford University Press, 1993, pp. 67–81

External links

Wikisource has the text of The New Student's Reference Work article White Lead.

• 
  Lead white, Colourlex