Rdxfbgrtj

McNary Dam
Spillway view from the southwest, Oregon side of the Columbia River
Location	Benton County, Washington / Umatilla County, Oregon, USA
Coordinates	45°55′47″N 119°17′46″W / 45.92972°N 119.29611°W / 45.92972; -119.29611Coordinates: 45°55′47″N 119°17′46″W / 45.92972°N 119.29611°W / 45.92972; -119.29611
Construction began	1947
Opening date	1954
Operator(s)	U.S. Army Corps of Engineers (Operator)
Dam and spillways
Type of dam	Concrete gravity, run-of-the-river
Impounds	Columbia River
Height	183 feet (56 m)
Length	7,365 feet (2,245 m)
Spillway type	Service, gate-controlled
Reservoir
Creates	Lake Wallula
Total capacity	1,350,000 acre⋅ft (1.67 km3)
Power Station
Commission date	1954-1957
Turbines	14
Installed capacity	1,127 MW
Annual generation	5,170 GWh[1][2]

McNary Dam is a 1.4-mile (2.2-km) long concrete gravity run-of-the-river dam which spans the Columbia River. It joins Umatilla County, Oregon with Benton County, Washington, 292 miles (470 km) upriver from the mouth of the Columbia.^[3] It is operated by the U.S. Army Corps of Engineers' McNary Lock and Dam office. The dam is located a mile (2 km) east of the town of Umatilla, Oregon, and 8 miles (13 km) north of Hermiston, Oregon. The dam was originally planned to be named Umatilla Dam, but the Flood Control Act of 1945 renamed the dam in honor of Senator Charles L. McNary of Oregon, who had died the previous year.

The dam provides for slackwater navigation, hydroelectric power generation, recreation, wildlife habitat, and incidental irrigation.

Water spilling at McNary Dam, seen from the Washington shore in July 2013.

Bills for the construction of a dam were introduced in the United States Congress as early as 1931.^[4] The United States House of Representatives rivers and harbors committee initially approved the project in April 1941; navigation, power generation, and national security were the major reasons cited for construction of the dam.^[5] Construction began in 1947, and was completed in 1954. Activation of all generating units was completed in 1957. Its capacity is 980 MW. There are two fish ladders for salmon and steelhead passage, one on each shore of the dam. The Washington side also has an 86-foot (26 m) wide, 683 foot (208 m) long navigation lock that lifts boats an average of 75 feet (23 m). The dam flooded the Umatilla Rapids, forming a reservoir called Lake Wallula. The lake extends 64 miles (103 km) up the Columbia to the US DOE Hanford Site. It also extends up the Snake River to the Ice Harbor Dam.

As with some other dams, it has two additional turbines whose purpose is to power the dam itself. That is, this dam is entirely self-sustaining. In the event of a large-scale grid outage, McNary would provide the black start capability necessary to restart other generation facilities. These two "station service" turbines are only capable of providing about three MW, compared to the 70 MW each of the other 14 turbines. These two turbines alternate service duty to provide the dam with its energy requirements.

McNary Dam is part of the Columbia River Basin system of dams.

Stats:

• Altitude: 344 feet (105 m) above sea level


• Height: 183 feet (56 m)


• Length: 7,365 feet (2,245 m)


• Navigation lock:
  
  
  
  • Single-lift
  
  
  • 86 feet (26 m) wide
  
  
  • 683 feet (208 m) long
  
  
  
  


• Powerhouse
  
  
  
  • Fourteen 70,000-kilowatt units
  
  
  • Total capacity: 980 megawatts
  
  
  • Overload capacity: 1,127 MW
  
  
  
  


• Spillway
  
  
  
  • Gates: 22
  
  
  • Length: 1,310 feet (400 m)
  
  
  
  

See also

• List of dams in the Columbia River watershed


• Hat Rock State Park


• Hydroelectric dams on the Columbia River


• List of lakes in Oregon


• McNary Dam Heliport

References

External links

Wikimedia Commons has media related to McNary Dam.

• 
  McNary Lock and Dam – Walla Walla District – U.S. Army Corps of Engineers